| 5-wire RS232 Touch Panel Controller Board | |
| Power Requirements | +5VDC (max. 100mA, typical 70mA, 50mV peak to peak max ripple) |
| Operating Temperature | 0 to 50 °C |
| Relative Humidity | 95% at 60°C |
| Protocol | 1. RS232: Max. 160 points/sec 2. USB: Max. 160 points/sec 3. PS2: Max. 140 points/sec |
| Resolution | 2048 x 2048 |
| Accuracy Tolerance | Max. +/- 0.5% tolerance |
| Report Rate | 1. RS232: Max. 160 points/sec 2. USB: Max. 160 points/sec 3. PS2: Max. 140 points/sec |
| Response Time | Max. 35 ms |
| Certification | FCC-B, CE |
| Pin Out Definition | X, Y, X, Y |
| Panel Resistance Soft ware Features | 200 ~ 900 ohm (pin to pin on the same layer) |
| Calibration Fast Full oriental | 4 points position |
| Compensation | 1. Accuracy 25 points linearity position 2. Edge compensation |
| Draw Test | Position and linearity verification |
| Controller Setting |
1. Support multiple controllers 2. Dynamical add/ remove controllers 3. Change controller interface without reboot |
| Languages | Support 10 languages for Windows |
| Mouse Emulator | 1. Right/ left button emulation 2. Click/ drawing mode |
| Sound Notification | 1. No sound 2. Touch down 3. Touch up |
| Double Click |
1. Configurable double click speed 2. Configurable double click area |
| OS Support |
1.Windows 95/ 98/ ME/ NT4/ 2000/ XP/ XP Tablet PC edition 2.Windows CE 2.12/ 3.0/ .net/ 5.0 3.Linux (up to Kernel 2.6) 4. MS-DOS: support display resolution: 320x200, 640x200, 640x350, 640x480, 800x600, 1024x768 and 1280x1024 5. iMac 9.0/ OS |
| COM Port Support |
1. Support COM1~COM256 for Windows and Linux 2. Support COM1~COM8 for DOS |
Display Support |
1. Support monitor/ display rotation 2. Support multiple monitors 3. Support split monitor |